Last date for Paper Submission has been Extended to : 13th March 2017, The Proceeding papers of FCSPTC 2017 will be published by AIP: Proceedings (Indexed by Scopus)

Paper Code

NAME OF THE AUTHORS

NAME OF THE TITLE

Page Numbers

AIP-003

Dr. B. Lavanya

Effect of Radiation on Free Convection Heat and mass Transfer Flow Through Porous Medium in a Vertical Channel With Heat Absorption/Generation and Chemical Reaction

&

AIP-004

Pankaj Thakur , Satya Bir Singh, Nishi Gupta,shivdev shahi

Effect of Mechanical Load and Thickness Profile on Creep In A Rotating Disc by Using Seth’s Transition Theory

&

AIP-005

K.I. Vishnu Vandana, Dr K.N.S.Suman , Dr V. Viswabaskaran

Characterization of Microwave Assisted Sintered Graphene Toughened Alumina (Gta) Nano Composites

&

AIP-006

C.H.Satya Sandeep ,U.Shiva Prasad,R Suresh Kumar,Athota Rathan Babu,G.Sravanthi,D.Govardhan

Design and Analysis of Submarine Radome

&

AIP-008

Amelia Trematerra, Ilaria Lombardi and Andrea D’Alesio

Use of Cork as Absorbent Material

&

AIP-009

P .Vickraman, S. Gopukumar

A.C. Impedance, XRD, DSC, SEM and Charge/Discharge Studies on Al2O3, Tio2, Sio2 Dispersoid Lipf6/PVC/Pvdf-Co-HFP Composite Polymer Electrolytes by Phase Inversion

&

AIP-011

Amelia Trematerra , Gino Iannace

Wind Turbines Acoustic Measurements

&

AIP-012

Divakar Shetty A S,Dineshkumar L,Swetha K Mane,Ravi Kumar,SANDEEP KOUNDANYA

Experimental Investigation on CRDI Engine Using Butanol-Biodiesel-Diesel Blends

&

AIP-014

Ravikumar V ,Dileep Bp,Vitala Hr

Tribological and Mechanical Characterization of Al-Ni-Sic MMC

&

AIP-016

Prabhudev B M,Satish Kumar S,Rajanna D

Numerical Flow Analysis of Axial Flow Compressor for Steady and Unsteady Flow Cases

&

AIP-018

K.M Ariful Kabir,Md. Rakibul Hasan,Md. Abdul Hakim Khan

Numerical Analysis of Natural Ventilation System in A Studio Apartment in Bangladesh

&

AIP-022

M.Mahadevan,P. Damodaran M. Arivanandhan, P.Anandan

Growth, Optical, Icp and Thermal Studies on Nonlinear Optical Single Crystal: Sodium Acid Phthalate (Naap)

&

AIP-023

Ambarish Maji, Dipankar Bhanja, P.K. Patowari, Gautam Choubey and Tuhin Deshamukhya

Computational Investigation of Heat Transfer Analysis Through Perforated Pin Fins of Different Materials

&

AIP-024

Devi V R , Farsana Farooq , Dr K Gopakumar

Hyperchaos Generated from 3d Chaotic Systems Using Pi Controller

&

AIP-026

Tuhin Deshamukhya,Dipankar Bhanja,Sujit Nath , Ambarish Maji, Gautam Choubey

Analytical Study of Temperature Distribution in A Rectangular Porous Fin Considering Both Insulated and Convective Tip

&

AIP-027

Sandeep Koundinya,Maria Ambrose Raj Y,Sreeram K,Divakar Shetty A S

Bio-Mass Utilization in High Pressure Cogeneration Boiler

&

AIP-028

Manjula Das Ghatak, and Prof. P. Mahanta

Kinetic Model Development for Biogas Production from Cattle Dung

&

AIP-029

Sergey Makarov,Vladimir Plotnikov,Mikhail Lysikov

Large-Deformation Plasticity and Acoustic Emission of an Al-Mg Alloy (1560) Under High-Temperature Loading

&

AIP-030

Siva Ramakrishna Madeti, S.N.Singh

Comparative Analysis of Solar Photovoltaic Monitoring Systems

&

AIP-031

Ulhas K Annigeri,Raghavendra Ravi Kiran K,Y P Deepthi

Design and Development of Progressive Tool for Manufacturing Washer

&

AIP-032

C V S S Sastry,M N V Ramesh,Ramesh Kocharlakota

Impedance and Ac Conductivity Studies of Sm3+ Substituted 0.8ba0.2(Bi0.5k0.5)Tio3 Lead Free Ceramics

&

AIP-033

Davuluri Venkateshand K V Ramesh

Effect of Sintering Temperature on Micro Structural and Impedance Spectroscopic Properties of Ni0.5zn0.5fe2o4nano Ferrite

&

AIP-034

MONANGI PRAMOD,YARKAREDDY GOPI REDDY, Prakash Marimuthu k

Prediction of Machining Induced Residual Stresses

&

AIP-036

Gautam Choubey, K. M Pandey, Ambarish Maji, Tuhin Deshamukhya and Lakka Suneetha

A Brief Review on the Recent Advances in Scramjet Engine

&

AIP-037

Castro R.A, Kononov A.A., Dao T.H. and Dolginsev D.M.

Dielectric and Structural Study of Polymer Composites Based on Polyethylene and Barium Titanate

&

AIP-039

Megha Karia, Mitesh Popat and Kamlesh Sangani

Selective Laser Melting of Inconel Super Alloy-A Review

&

AIP-044

S. Jayachandran, R. N. Prithiviraajan, and K. S.Reddy

Characterization of Various Two-Phase Materials Based on Thermal Conductivity Using Modified Transient Plane Source Method

&

AIP-045

V. Ganesh, M. Alizadeh, A. Shuhaimi, S.Sundaram, K. M. Hakim, B. T. Goh and S.A. Rahman

Synthesis and Characterization of Inn Nanocrystals on Glass Substrate by Plasma Assisted Reactive Evaporation

&

AIP-046

R.Giri and G.Nath

Extraction Study on Uranyl Nitrate for Energy Applications

&

AIP-049

G Reddy Babu

Effect of Wastewater on Properties of Portland Pozzolana Cement

&

AIP-050

Sreehari Peddavarapu,Venkata Sai Sunil Gujjalapudi,Raghuraman S

Influence of Pareto Optimality on the Maximum Entropy

&

AIP-051

E. Veena, Kasturi V. Bangera, G. K Shivakumar

Influence of Zinc Precursor Concentration on Properties of Spray Deposited Zinc Sulphide thin Films.

&

AIP-052

M Varshini,Divakar Shetty A S

Experimentation on Bio-Kerosene Stove using Organic Additive

&

AIP-053

Ravikumar V,Mohan Kumar S,Dileep Bp,Phanibhushana Mv

Effect of Metal Coatings on Mechanical Properties of Aluminum Alloy

&

AIP-054

S Deepthi,Anjali Jha,Ravi Shankar Kumar

Synthesis and Quantum Chemical Studies of Metallo organics for Electro-Optical Studies

&

AIP-056

B Venkateswara Rao,Venkata Nagesh Kumar,D Deepak Chowdary,M Aruna Bharathi,S Patra

B Venkateswara Rao,Venkata Nagesh Kumar,D Deepak Chowdary,M Aruna Bharathi,S Patra

&

AIP-057

Amelia Trematerra,Ilaria Lombardi

Sound Absorption with Green Materials

&

AIP-059

Mohd Zeeshan,Saheera Azmi Hazarika,Sujit Nath,Dipankar Bhanja

Numerical Investigation on the Performance of Fin and Tube Heat Exchangers using Rectangular Vortex Generators

&

AIP-060

Saheera Azmi Hazarika,Mohd Zeeshan,Dipankar Bhanja,Sujit Nath

Analytical Study on the Thermal Performance of A Partially Wet Constructal T-Shaped Fin

&

AIP-067

Lokendra Kumar,Shrabani Majumdar,Raj Kumar Sahu

Measurement of the Residual Stress in Hot Rolled Strip using Strain Gauge Method

&

AIP-068

Raminder Gill

Superconductivity and Ferromagnetism in Nonomaterial Nbse2

&

AIP-071

Prasad Raju Mlv,Lokesh Gulla,Ramanjaneyulu Bolleneni

Glass Fiber Effect on Mechanical Properties of Eco- SCC

&

AIP-072

Saji S K,Jeyasingh T,Vinodkumar R,P R S Wariar,Radhakrishnan R

Temperature Dependent Electrical Properties of Combustion Synthesized Gdalo3 Perovskite

&

AIP-073

Swati Parashar,Sheelam Misra,Sanatan Ratna

Experimental Investigation of Infiltration on Sediment Transport in Channels

&

AIP-074

Akriti Gupta,Pradeep Kumar,Sujata Pandey

Effect of Substrate Material on Sensing Behaviour of SAW Based Gas Sensors

&

AIP-076

Manzoor Elahi M Soudagar,Azeem Azeem,Irfan Anjum Badruddin Magami

Investigation of Heat Transfer due to Isothermal Heater in Irregular Porous Cavity: Part I

&

AIP-078

Manzoor Elahi M Soudagar, Azeem Azeem

Investigation of Heat Transfer due to Isothermal Heater in Irregular Porous Cavity: Part II

&

AIP-079

Manzoor Elahi M Soudagar, Azeem Azeem

Investigation of Heat Transfer due to Isothermal Heater in Irregular Porous Cavity: Part III

&

AIP-080

Hemal J Shah, Dr. Atul K Desai

Evaluation of Dynamic Response for Monopole and Hybrid Wind Mill Tower

&

AIP-081

Prashanth B N

Design and Fabrication of Magnetic Coolant Filter

&

AIP-082

Siva Koteswararao Katta, Dr.G. Chaitanya

Key Improvements in Machining of Ti6al4v Alloy: A Review

&

AIP-084

Prashanth B N

To Select the best Tool for Generating Three Dimensional Maintenance Data and to Set the Detailed Process for Obtaining Three Dimensional Maintenance Data

&

AIP-085

Manzoor Elahi M Soudagar, N. Ameer Ahamad N. Ameer Ahamad, Irfan Anjum Badruddin Magami

Double Diffusion in Arbitrary Porous Cavity: Part I

&

AIP-086

Konstantin, Iliana Y. Stoynova

Dynamic Thermal Wave Response and Propagation Through Building Structures using Infinite Elements in Time and Frequency Domain

&

AIP-087

Jeyasingh T, Saji S K, P R S Wariar

Synthesis of Nanocrystalline Gd2Ti2O7 by Combustion Process and its Structural, Optical and Dielectric Properties

&

AIP-088

Manzoor Elahi M Soudagar, Sarfaraz Kamangar, Salman Ahmed N.J , T M Yunus Khan

Double Diffusion in Arbitrary Porous Cavity: Part II

&

AIP-089

Manzoor Elahi M Soudagar, N.Ameer Ahamad, Sarfaraz Kamangar, Salman Ahmed N.J, Yunus Khan T. M.

Double Diffusion in Arbitrary Porous Cavity: Part III

&

AIP-091

Salam Kamoona, Syed Masood, Omar Mohamed

An Investigation on Impact Resistance of FDM Processed Nylon-12 Parts using Response Surface Methodology

&

AIP-092

Arnab Mukherjee, Swetapadma Rout, Ashok Kumar Barik

Entropy Generation Analysis in A 180-Degree Return Bend Pipe using Nanofluid

&

AIP-095

Ranjitha.K, Gayathri.G, Ritu Tomar, Matheus Poletto, V.Annadurai, R.Somashekar

Change in Shape of the Crystallite Size with Wood Flour and Their Native Cellulose using WAXS Studies

&

AIP-096

Komanapalli Gurumurthy, Pandey Neeta, Pandey Rajeshwari

OTRA Based Second and Third Order Sinusoidal Oscillators and Their Phase Noise Performance

&

AIP-097

Debayan Dasgupta, Sujit Nath, Dipankar Bhanja

Linear Stability Analysis of Planar Liquid Sheet Subjected to Unequal Gas Velocities Confined between two Solid Walls

&

AIP-098

Ali Imran Ansari, Santosh J. Chauhan, Pallavi Khaire

Effect of Crack on Natural Frequency in Rotor System

&

AIP-099

Basavaraj Noolvi, Shanmukha Nagaraj, Raja S

Fabrication and Testing of SMA Composite Beams with Shape Control

&

AIP-100

Saurabh Uttam Sawant, Santosh Chauhan, Nilaj Deshmukh

Effect of Crack on Natural Frequency for Beam type of Structures

&

AIP-101

C Durga Prasad, Gvs Sarma, Ramesh Kv

Effect of Temperature on the Viscosities of Mixed Micellar Solutions

&

AIP-102

Arpana Sawant, Nilaj Deshmukh,santosh chauhan,mandar dabhadkar,rupali deore.

Design and Analysis of Lifting Tool Assemblies to Lift Different Engine Block

&

AIP-103

Jayasheel Harti, Prasad T B, Madeva Nagaral, Pankaj Jadhav, Anjan Babu V A

Evaluation of Wear Properties of TiC Particulates Reinforced Al2219 Alloy Composites

&

AIP-104

Dr. Dsv Prasad

Compressive Strength of Concrete by Partial Replacement of Cement with Meta kaolin

&

AIP-105

Madeva Nagaral, V Auradi, S A Kori, Reddappa H N, Veena Shivaprasad

Studies on 3 and 9 Wt. % of B4C Particulates Reinforced Al7025 Alloy Composites

&

AIP-106

Amit Kumar Gautam, Sudipta Majumdar

Volterra Model of Silicon Controlled Rectifier

&

AIP-107

Anvar Valeev

Numerical and Experimental Analysis of Metamaterials with Quasi-Zero Effect for Vibration Isolation

&

AIP-108

Latha Shenoy, C Gurudas Nayak, Rajashekar P Mandi

State Space Analysis of Boost DC/DC Converter with Voltage Mode Control

&

AIP-109

Denis Rylow, Oleg A. Malafeyev, Nadezhda Redinskikh

Game-Theoretic Model of Dispersed Materials Drying Process

&

AIP-111

Sangeetha Mahendrakar, Mallikarjun Anna, Jaipal Reddy M

SEM, XRD and Electrical Conductivity Studies of PVDF-HFP-Libf4 –EC Plasticized Gel Polymer Electrolyte

&

AIP-115

Emani Sampath, Ramasamy Marappagounder, Kuzilati Kushaari

Transportation And Adhesion Of Asphaltenes in A Heat Exchanger Tube Through CFD Simulations

&

AIP-116

Emani Sampath, Ramasamy Marappa Gounder, Ku Zilati Ku Shaari

CFD Modeling of Shell-Side Asphaltenes Deposition in A Shell and Tube Heat Exchanger

&

AIP-117

Saji S K, Jeyasingh T, Vinodkumar R, Prs Wariar, Radhakrishnan R

Structural And Dielectric Characterization of Combustion Synthesized Perovskite Neodymium Aluminate

&

AIP-118

Sundararaman Gopalan, Shibesh Dutta, Sivaramakrishnan Ramesh, Ragesh Prathapan, G. S. Sreehari

Al203 Thin Films on Silicon and Germanium Substrates for CMOS and Flash Memory Applications

&

AIP-119

Deva Nand, Neeta Pandey, Rajeshwari Pandey, Prateek Tripathi, Prashant Gola

OFCC Based Voltage and Transadmittance Mode Instrumentation Amplifier

&

AIP-120

Santosh Kumar Dash, Pradip Lingfa

A Review on Production of Biodiesel Using Catalyzed Transesterification

&

AIP-121

Viswajit Talluru,T Ravitheja

A Case Study of Printing Industry Plant Layout for Effective Production

&

AIP-122

Thillai Rani L,siva kumar,rathikarani

Dynamic Matrix Controller Design for Performance Study of an Interacting Coupled Tank MIMO Process

&

AIP-123

Dr.Suresh Pittala

Structural and Magnetic Properties of Polycrystalline La2NiMnO6 Thin Films

&

AIP-124

Shwetha G. Bhat,Abraham M. Koshy,Suresh Pittala,P. S. Anil Kumar

Tuning the Growth of Iro2 on Srtio3 (100) for Spin Hall Effect Based Oxide Devices

&

AIP-128

Dr.Mohd. Zahid Ansari,Chongdu Cho

Optimised Step Profile Micro cantilevers for Biosensors

&

AIP-135

Gude Reddy Babu,G Madhav Kumar

An Eco Friendly Solution to the Food Waste Disposal

&

AIP-136

Shiva Phani,Ramu Mutyala

A Lagrangian based Novel Decommitment Method for unit Commitment

&

AIP-137

Dr.B Surekha,Sudiptha Swain,Abu Jafar Suleman Suleman,Suvan Dev Choudhury

Performance Capabilities of EDM of High Carbon high Chromium Steel with Copper and Brass Electrodes

&

AIP-139

Omar Mohamed,Syed Masood,Jahar Bhowmik

Effects of Build Parameters on Linear Wear Loss in Plastic Part Produced by Fused Deposition Modeling

&

AIP-140

Omar Mohamed,Syed Masood,Jahar Bhowmik

Investigation of the Influence of FDM Operating Parameters on Dynamic Force Response using IV-Optimal Design and Principal Component Analysis

&

AIP-141

Rameshbabu Chandran

Technical note on using Cnts as Reinforcements in Reinforced Concrete Structural Elements

&

AIP-142

Muhammad Ismail Mohmand,Mustafa Mamat,Qayyum Shah

Engineering Applications and Analysis of Vibratory Motion Fourth Order Fluid Film over the Time Dependent Heated Flat Plate

&

AIP-143

A Vinutha,Ch Venkata Anvesh,R Art Babu,P n sarma

Experimental and CFD Studies on Sno2 Coatings over Solar Cells to Increase Collector Efficiency

&

AIP-144

Uday Kumar Padidela,Raghu Nath Behera

Interactions in Charged Colloidal Suspensions: A Molecular Dynamic Simulation Study

&

AIP-147

Naveena Koppati, Pavani Pvn, Dinesh Sharma and Purnima.K Sharma

MIMO tO LS- MIMO: A Road to Realization of 5g

&

AIP-148

Palavalasa Rohinikumar, Mg Muni Reddy and Ramesh Kv

Gas Holdup in A Bubble Column in the Presence of Coaxially Placed String of Spheres Promoter as Internal

&

AIP-149

D Dastagiri Babu, Suretty Venkateswarlu and E Keshava Reddy

Heat and Mass Transfer on Unsteady MHD Free Convection Rotating Flow through A Porous Medium over an Infinite Vertical Plate with Hall Effects

&

AIP-150

B Siva Kumar Reddy, K V Surya Narayana Rao and R Bhuvana Vijaya

HAM Solutions on MHD Squeezing Axisymmetric Flow of Water Nanofluid through Saturated Porous Medium between two Parallel Disks

&

AIP-151

Guntha Aravind, Vasarla Nathanial, D Ravinder, R Vijaya Kumar and M Srinivas Reddy

FC And ZFC Magnetic Properties of Ferro-Spinels (Mfe2o4) Prepared by Solution-Combustion Method

&

AIP-153

Akshat Jain, Sheelam Misra, Arun Jindal and Prateek Lakhiani

Structural Analysis of Compression Helical Spring used in Suspension System

&

AIP-154

Kalivara Prasad

Implementation of Four Layer Automatic Elevator Controller

&

AIP-156

Zelda Rasmeni and Xaiowei Pan

Increased Energy Efficiency of A Steel Foundry Plant by using A Cleaner Production Quick-E-Scan Methodology

&

AIP-157

Caesar Mahlami and Xiaowei Pan

Mechanical Properties and Microstructure Evaluation of High Manganese Steel Alloyed with Vanadium

&

AIP-158

R Pramod and Dr G B Veeresh Kumar

Investigation of Mechanical Properties of Aluminium Reinforced Glass Fibre Polymer Composites

&

AIP-159

Shashi Kumar M E, Ravi Kumar and Mohan Kumar S

Mechanical Characterization and Fracture Toughness of Electroplated Cadmium Coating of Al –Zn Alloy, T6

&

AIP-160

R Pramod, G B Veeresh Kumar and B N Prashanth

Design and Fabrication of Metal Briquette Machine for Shop Floor

&

AIP-161

Dr.Vamsi Krishna Narla and Dr.Vijayasekhar Jaliparthi

Entropy Analysis of Pressure Driven Flow in A Curved Duct

&

AIP-162

Mounika Meda and Lingareddy P

Fault Current Reduction by SFCL in A Distribution System with PV using Fuzzy Logic Technique

&

AIP-164

Shashi Kumar M E and Pramod R

Experimental Investigations on Carbon-Nomex T410 Reinforced Polymer Matrix Composite for Enhanced Mechanical and Tribological Properties

&

AIP-165

P. Subhashini , N.Lakshminarayan, D. Selvakumari ,Sreejavijay

DMC Route to Stoichiometric Preparation of Zinc Sulphide Nanoparticles

&

AIP-166

B.V.Swarnalathamma ,M.Veera Krishna

Hall Effects on MHD Flow of Heat Generating/Absorbing

&

AIP-169

Venkatesh Sharma, Behailu Shewandagn and Shankar Nayak Bhukya

VLSI Implementation of Flexible Architecture for Decision Tree Classification in Data Mining

&

AIP-170

R Pramod, Dr G B Veeresh Kumar and Pallerlamudi Sai Sri Harsha

Design and Development of Nautilus Whorl-Wind Turbine

&

AIP-171

Vinod Kotebavi and Nagaraja Sr

Performance Study of Thermo - Electric Generator

&

AIP-173

Vasudevan T and Rakesh S G

Studies on the Effect of the Temperature of Intermediate Fluid on the Effectiveness of Three Fluid Heat Exchangers

&

AIP-174

M Kaveri,Ch Venkata Anvesh,R Art Babu,A Vinutha

Analysis of Non Linear Thermo-Mechanical Behavior of Thin Rectangular Plates

&

AIP-177

M.Veera Krishna,B.V.Swarnalathamma

Hall Effects on Unsteady MHD Reactive Flow of Second Grade Fluid through Porous Medium in A Rotating Parallel Plate Channel

&

AIP-178

Srinivas Rao Tatavarthy

A Performance Evaluation of ACO and SA TSP in A Supply Chain Network

&

AIP-179

Nudurupati SVN Hanuman,P.Gangadhar rao,Dr. B. Sudheer kumar,nerella Karthik

on modeling the cnc end milling charatcerstics of al2-7075/wcpowered metaullargy composites

&

AIP-180

V. VIJAYABHASKAR,Dr. kolla srinivas

mechanical characteristic of glass fiber(woven roving/chopped around

&